Stainless Steel Wire Mesh Suction Oil Filter Cartridge provide protection to the hydraulic pump from particles larger than 10 micron. You should use a suction filter if there is any likeihood of pump damage due to large particles or pieces of dirt. For example, this may occur when it is difficult to clean the tank or if several hydraulic systems use the same tank for oil supply.
Product | Suction Oil Filter |
Type | Cartridge |
Connection | Galvanized Steel / Nylon |
Support tubes | Galvanized Steel |
Caps | Nylon |
Micron | 200 |
Temperature |
-25℃ to +110℃ |
Thread | Female |
Low cost
Servicing difficulty, since mounting is below fluid level
Grade of filtration: Coarse Filtration
25 to 90 μm, using stainless steel filter mesh
10 μm, using paper
10 to 25 μm, using glass fiber